Anti-cracking synthetic fiber cement reinforced PP fiber

Short-Cut Concrete Anti-Crack PP Fibre(SAP 106S/112S/118S)DescriptionMicro-reinforcement system for concrete-100% virgin polypropylene monofilament fibers containing no reprocessed olefin materials. Micro pp fiber is designed to control plastic shinkage and settlement cracking in concrete.ApplicationsSlabs on groundSide-walks, d

Featured Products

Short-Cut Concrete Anti-Crack PP Fibre

(SAP 106S/112S/118S)

Description
Micro-reinforcement system for concrete-100% virgin polypropylene monofilament fibers containing no reprocessed olefin materials. Micro pp fiber is designed to control plastic shinkage and settlement cracking in concrete.
Applications
  • Slabs on ground
  • Side-walks, driveways,decks, curbs
  • Precast elements
  • Overlays / toppings
  • Tunnel shotcrete
  • Roads / Pavements
  • Bridge Decks
Benefits
  • Reduces plastic shrinkage cracking.
  • Improves impact, shatter and abrasion resistance
  • Increases cohesion and reduces segregation
  • Reduces freeze/thaw damage
  • Promotes uniform bleed and reduces bleed water to prolong the life of the building.
  • Cost saving, Is easier to use,to disperse and safe to handle.
  • Can be used in highly corrosive circumstance.

Technical Information
Tensile Strength>450 MPa
Modulus >4300 MPa
Monofilament pull-out force>11.0 CN
Fibre dimensionLength: 6mm / 12mm / 18mm;
Diameter:22-45μm
Melt Point170ºC
Ignition580ºC                                                     
Density0.91g/cm3                                             
Acid&Alkali ResistanceExcellent
Moisture Content0.41%
Appearance White, bundled monofilament
SafetyNon-toxic, non-irritating, neutral

Guidelines for use
The dosage rate is dependent on the application and should be 0.9 kg/m3-1.5kg/m3.
Generally keep the original mix ratio and the stressed steel bar, no need to change.
Mixture method and time. Pouring dry materials (sand, cement, etc.) and the fibre evenly, before pouring water. Dry stirring for 30-60 seconds. After pouring water, stirring, and the stirring time should be 30-60 seconds longer than usual.

Packing
1kg/bag,660kg/pallet, 6,600kg/20'container,13,200kg/40' container. Can be coutomizable.

Wall Crack Prevention Synthetic Fiber Cement Reinforcement PP FibreWall Crack Prevention Synthetic Fiber Cement Reinforcement PP Fibre
The Fibre is very easy to mix
 
Wall Crack Prevention Synthetic Fiber Cement Reinforcement PP Fibre
Wall Crack Prevention Synthetic Fiber Cement Reinforcement PP FibreWall Crack Prevention Synthetic Fiber Cement Reinforcement PP Fibre
Packing method: 1kg/bag, 5kg/box, 660kg/pallet
Wall Crack Prevention Synthetic Fiber Cement Reinforcement PP Fibre
Step of Micro PP Fibre Manufacturing

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours