Aerogel Insulation Blanket FMA650
Nano Tech Co., Ltd was registered in the State Administration for Industry and Commerce with registered capital 50 millions and annual output over than 2millions square meter of silica aerogel. The factory not only owns 32,000m2 plant area and all kinds of auxiliary facilities, but four sets of aerogel production lines with independent intellectual property as well. So it is the earliest,biggest and most strongest and reliable developer and manufacturer of super thermal insulation material silica aerogel in China.
Main Features:
Superior Thermal Performance
Up to five times better high-thermal performance than competing insulation products;
Reduced Thickness and Profile
Equal thermal resistance at a fraction of the thickness;
Less Time and Labor to Install
Nano Aerogel insulation is easily cut and conformed to complex shapes, tight curvatures, and spaces with restricted access;
Reusable
Nano Aerogel is easily removed for inspection and maintenance and can be reused in original service, reducing downtime and eliminating the need to purchase replacement insulation at regular maintenance cycles ;
Physically Robust and Impact Resistant
Good flexibility and high tensile strength performance can resisit stretching and stress from linear contraction when temperature changes, and protecting critical assets from compromise due to tool strikes, footfalls, lifting, and transportation.
Shipping and Warehousing Savings
Reduced material volume, high packing density, and low scrap rates can reduce shipping volumes by a factor of five or more compared to rigid, pre-formed high-temperature insulations.
Fireproof and Waterproof
Nano aerogel can reach the grade A1 noncombustible standard and the hydrophobic rate reaches 99.8%, which can avoid the material losing the thermal insulation efficiency caused by water and subsidence.
Simplified Inventory
Unlike rigid pre-forms such as pipe cover or board, the same Nano aerogel insulation blanket can be kitted to fit any shape or design;
Environmentally Safe
Nano Aerogel's high-temperature insulation is landfill disposable, shot-free, with no respirable fiber content.
Long Service Life
Nano Aerogel's three-dimensional structure which is different with other insulations inhibits sintering warpage and particles stack which may occur under hot temperature for a long time, maintains its long service.
Sound Insulation and Shock Absorption
Sound resistance and shock absorption make better working environment.
Specification
FMA650/3
FMA650/6
FMA650/10
Thickness
3mm
6mm
10mm
Length
34m
34m
25m
Width
1500mm
Color
White
Density
200±10kg/m3
Suggested Working Temperature
-50~650ºC
Notes: Size could be on customer's requirement.
Technical Data
Size Stability
1%
GB/T 8811
Shrinkage Temperature under Pressure
800ºC
GB/T 11835
Compressive Property
@10% 60KPa
@20% 120KPa
GB/T 13480
Fire Rating
Incombustibility
GB/T 8624
Tensile Strength
1400KPa
GB/T 17911
Thermal Conductivity
(Average Temp)
25ºC
0.018 W/(m·K)
GB/T 10295
200ºC
0.024 W/(m·K)
300ºC
0.032 W/(m·K)
400ºC
0.042 W/(m·K)
500ºC
0.051 W/(m·K)
650ºC
0.062 W/(m·K)
Function
For 300ºC~650ºC pipes or equipment insulation
Application
Super pressure steam pipes and equipments and industrial furnace insulation
Main Applications:
Energy Infrastructure: High temperature steam pipes, vessels and equipment, and aerospace and defense systems; Medium to high temperature offshore oil pipelines.
Nano Tech Co., Ltd was registered in the State Administration for Industry and Commerce with registered capital 50 millions and annual output over than 2millions square meter of silica aerogel. The factory not only owns 32,000m2 plant area and all kinds of auxiliary facilities, but four sets of aerogel production lines with independent intellectual property as well. So it is the earliest,biggest and most strongest and reliable developer and manufacturer of super thermal insulation material silica aerogel in China.
Main Features:
Superior Thermal Performance
Up to five times better high-thermal performance than competing insulation products;
Reduced Thickness and Profile
Equal thermal resistance at a fraction of the thickness;
Less Time and Labor to Install
Nano Aerogel insulation is easily cut and conformed to complex shapes, tight curvatures, and spaces with restricted access;
Reusable
Nano Aerogel is easily removed for inspection and maintenance and can be reused in original service, reducing downtime and eliminating the need to purchase replacement insulation at regular maintenance cycles ;
Physically Robust and Impact Resistant
Good flexibility and high tensile strength performance can resisit stretching and stress from linear contraction when temperature changes, and protecting critical assets from compromise due to tool strikes, footfalls, lifting, and transportation.
Shipping and Warehousing Savings
Reduced material volume, high packing density, and low scrap rates can reduce shipping volumes by a factor of five or more compared to rigid, pre-formed high-temperature insulations.
Fireproof and Waterproof
Nano aerogel can reach the grade A1 noncombustible standard and the hydrophobic rate reaches 99.8%, which can avoid the material losing the thermal insulation efficiency caused by water and subsidence.
Simplified Inventory
Unlike rigid pre-forms such as pipe cover or board, the same Nano aerogel insulation blanket can be kitted to fit any shape or design;
Environmentally Safe
Nano Aerogel's high-temperature insulation is landfill disposable, shot-free, with no respirable fiber content.
Long Service Life
Nano Aerogel's three-dimensional structure which is different with other insulations inhibits sintering warpage and particles stack which may occur under hot temperature for a long time, maintains its long service.
Sound Insulation and Shock Absorption
Sound resistance and shock absorption make better working environment.
Specification
FMA650/3
FMA650/6
FMA650/10
Thickness
3mm
6mm
10mm
Length
34m
34m
25m
Width
1500mm
Color
White
Density
200±10kg/m3
Suggested Working Temperature
-50~650ºC
Notes: Size could be on customer's requirement.
Technical Data
Size Stability
1%
GB/T 8811
Shrinkage Temperature under Pressure
800ºC
GB/T 11835
Compressive Property
@10% 60KPa
@20% 120KPa
GB/T 13480
Fire Rating
Incombustibility
GB/T 8624
Tensile Strength
1400KPa
GB/T 17911
Thermal Conductivity
(Average Temp)
25ºC
0.018 W/(m·K)
GB/T 10295
200ºC
0.024 W/(m·K)
300ºC
0.032 W/(m·K)
400ºC
0.042 W/(m·K)
500ºC
0.051 W/(m·K)
650ºC
0.062 W/(m·K)
Function
For 300ºC~650ºC pipes or equipment insulation
Application
Super pressure steam pipes and equipments and industrial furnace insulation
Main Applications:
Energy Infrastructure: High temperature steam pipes, vessels and equipment, and aerospace and defense systems; Medium to high temperature offshore oil pipelines.