Eliminate the traditional decoration,
save the labor period of 70%,
save labor by 50%,
bid farewell to cumbersome construction
refuse safety risks.
Introduction
ZJT Lightweight Composite Energy-saving Sandwich Wall Panel. Is composed of face panel and interior filing. The material of face panel is thin fiber. cement board or calcium silicate board, and. the middle is filled with lightweight composite core materials, including cement, EPS and fly ash, The quality and. technology of product have reached to a new level and became the leading brand among the similar products.


 
Application
Applicable to sub-room sound insulation has higher requirements on the project: hotel, ktv, school, hospital , villa and so on.
Applicable to projects that have restrictions on construction: the wall of the mall, the second renovation of the partition wall.
Applicable to the requirements for reducing the wall load: ultra-high wall, light steel house, steel structure, prefabricated house.
Applicable to projects with special requirements for fire protection: pipeline wells, firewalls, large kitchens.
Applicable to projects that require construction progress.
Applicable to projects with special requirements for moisture and water resistance: bathroom, washroom, kitchen, outdoor and other projects.
Applicable to the requirements of nail-paste attachment: tooling, home improvement, interior and exterior walls and other conventional partition walls.

 

1. Floor

1. Roof

 

1. Exterior wall

 

1. Interior wall

 

1. High building

 

1. Pipe / fire well / equipment partition

Ten advantages
  1.Environmental protection
ZJT panel is produced using soilless raw materials. It can maintain the indoor temperature at a constant level, achieve the long-lasting effect of true green ecological energy saving, and not emit any toxic gas, fully comply with international green energy conservation and environmental protection standards.

  

  2. increase the use of area
ZJT energy-saving wall panels generally use 90mm composite wall boards to be 30mm less than the thickness of 120mm brick walls, which means that the use of ZJT energy-saving wall panels can increase the indoor space by 4.26 square meters per 100 square meters. usage area.

 
  3.moisture, waterproof
ZJT lightweight energy-saving wall panel can be made into water in containers without plastering. The back of the wall is kept dry without any imprinting and no leakage. At the same time, in the wet weather, the wall will not appear condensation water droplets, showing a real waterproof and moisture-proof effect.


  4. fire prevention
ZJT lightweight energy-saving wall panel is mainly made up of high-quality cement, high-tech EPS polystyrene foam particles and refined fly ash and other lightweight core materials. Its fire resistance limit at 1000 °C is 4 hours. The fireproof building materials quality supervision and inspection center tests that the fire performance meets the national A-pole standard and achieves the ideal fire and heat insulation effect. Generally, the masonry has no heat insulation function, and it conducts quickly when exposed to heat, which is not good for fire prevention.


  5. sound insulation
Due to its high density and easy reflection, it has a strong sound insulation effect and is superior to general masonry. 42db sound insulation effect, in line with China's national sound insulation test standard GBJ121-88. The general sound insulation effect of masonry is 35-40DB.

 

1. Simple construction, civilized and short construction period
   The use of ZJT lightweight energy-saving wall panel, convenient construction, civilized, short construction period, no sand, cement and other materials in the construction, the material stack is simple, efficient, small size, occupying less resources such as site equipment, no construction waste, after construction is completed No need to plaster.

  8.The composite wall panel can be arbitrarily slotted as needed, and the nails or the upper expansion bolts can be used to hang heavy objects, such as air conditioners. The single-point hanging force is above 45kg, and the panel surface of the wallboard is smooth and smooth, and no dust is generated. The tiles, wallpaper, wood trim and other materials can be directly pasted for finishing. Generally, masonry, especially solid masonry, can not be arbitrarily nailed, which brings trouble and difficulty to the rear decoration.
  10. Lightweight and economical
ZJT lightweight energy-saving wall panel is the lightest and thinnest high-tech new wall material among all solid wall materials. Compared with other wall materials, the weight ratio is 1:5 or more. At the same time, the standard thickness of ZJT 90 lightweight energy-saving and environmental protection multi-functional wallboard is 90mm, which is equivalent to the traditional block (24cm) in terms of comprehensive performance and use effect. Greatly reduce the area occupied by the wall, effectively save space, greatly improve the practical area of the house, greatly reduce the structural load, comprehensively improve the seismic capacity and safety performance of the building, and reduce the overall construction cost.
   Certificate(TUV/SGS)