ZJT Concrete panel company is the 1st Company that innovates, commercializes and adapts the technologies to provide new ideas products and to be the No. 1 Lightweight Wall Panels Supplier / Producer in the Country. Our proposed product is more economical, easy and much faster in the installation and ready for the painting than the Blocks & Gypsum Partitions etc., which gives a better1 ZJT Sandwich Panel Type
-- With EPS grain
2 ZJT Sandwich Panel Composition
Face: Calcium Silicate Board
Core: Cement+EPS Polystyrene Foam+Sand
ZJT Sandwich Panel Specifications
|Item||Parameter Index Specifications|
|2||Anti-bending damage load/times over deadweight||≥3.0||≥3.0||≥3.0||≥3.0||≥5.0||≥5.0||≥7.0|
|7||Dring shrinkage value(mm/m)||≤0.5||≤0.5||≤0.5||≤0.5||≤0.5||≤0.5||≤0.5|
|9||Sound insulation capacity in the air(dB)||≥35||≥35||≥40||≥40||≥45||≥50||≥55|
|11||Heat transfer coefficient(w/m2.k)||≤2.0||≤2.0||≤2.0||≤2.0||≤2.0||≤2.0||≤2.0|
|12||Inner radiation index||≤1||≤1||≤1||≤1||≤1||≤1||≤1|
|13||Outer radiation index||≤1||≤1||≤1||≤1||≤1||≤1||≤1|
|14||Frost resistance(shall show no visible cracks and surface without change)||_||_||shall show no visible cracks and surface without change|
|15||The combustion properties(A1 or A2)||_||_||A1 or A2|
ZJT Sandwich Panel Advantages
1) Heat insulation and Preservation The major material is polystyrene grains and other anti-freezing and heat preserving environmental protection materials, which could adjust the indoor temperature at a constant range thus achieving the effects of ecological adjustment.
2) Waterproof and Fireproof The face panel of energy-saving boards on both side are 5mm calcium silicate fireproof board and the main materials is a mixture of cement, sand, fly ash etc.
Fireproof and high temperature resistant: Throw it into boiling water or in fire, last for four hours, it's nonflammable
3) Sound insulation and Absorption The inside construction material (EPS polystyrene grain) functions well in sound insulation and sound-absorbing.
|Sound insulation capacity||DB||≥35||≥40||≥40||≥45||≥50||≥55|
|Anti-bending damage load||Times of self-weight||≥5||≥5||≥5||≥7||≥8||≥9|
|Anti-impact strength||Times of self-weight||≥5.0||≥5.0||≥5.0||≥5.0||≥5.0||≥5.0|
5) High intensity and Quake Proof The energy saving boards are all with high intensity and the earthquake resistance can reach 8.5 magnitudes.
6) Space and Cost Saving For its thickness and lightweight features, the building area is largely increased and saves the cost construction structure a lot.
5 ZJT Sandwich Panel Application
ZJT light weight compound sandwich panel can be innovatively used as floor board. This system has the outstanding advantages such as hight load-bearing capacity, anti-static electricity, friction resistance, high strength, convenient for wire groove and water pipe inbuilt, corrosion resistance, no deformation, no split, etc., which is much suitable for the fields including the floor plate of additional top floor, factory, workshop, warehouse, etc.
Villa&Exterior Wall System
Light weight compound sandwich panel can automatically adjust indoor air and water content with the season and climate changes, and such ecology effect just goes with the tide of modern residential building.
Interior Partition System
Light weight compound sandwich board have been widely applying to the special positions like partition panel of high-rise and mega-high-rise buildings.
Light weight compound sandwich panel roof system brings brand-new added value and application idea to the traditional roof construction. Its easy construction time, which bring out its hight integrated performance.
6.ZJT Sandwich Panel Packing
1)Free packing, normal pallet + packing belt
2)Standard exporting packing, good pallet+pearl wool+corner protective paper+packing belt+plastic thin film
3)Loading: Normally 18 pallets per 20' container or according to clients' requirements
There're two kinds of ways to install, vertically, and horizontally
Why are ZJT concrete wall panels better than brick wall
• Quick to install
• No need for skilled labor
• No plaster just wall putty
• Electrical installations easy
• Cheap raw material
• Light to handle
• Rather large-sized elements
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture. We can produce more than 2 million square meters of various wall materials annually
Xiamen Zhongjingtai Building Materials Co.,Ltd
Add: Unit-2A-D Lianchang Building No6-8 Huli Avenue, Huli District Xiamen Fujian China
Website: Http://zjteps.en.made-in-china.com Http://zjteps.en.made-in-china.com